News

Rare earth magnesium ferrosilicon quotations in China were unchanged on October 27, 2026. Both grades tracked here, 46089 and 46150, held exactly the levels reported for October 26 in Inner Mongoli...

Rare earth ferrosilicon is a foundry and steelmaking additive rather than a refined metal or oxide, and it is priced accordingly: in yuan per tonne, ex-works and tax-inclusive, on a lower unit-valu...

This sheet lists the export prices quoted in China on October 27, 2026 for seventeen rare earth metal and oxide grades, spanning the light, medium and heavy groups that dominate cross-border trade....

Low impurity ferroalloys are metallurgical additives refined to tighter ceilings on tramp and trace elements such as aluminum, calcium, titanium, sulfur, and phosphorus, supplied to steel producers...

Low aluminum ferrosilicon is a refined ferrosilicon grade in which aluminum is controlled to a lower ceiling than standard commercial FeSi, typically manufactured in submerged arc furnaces with cha...

Low aluminum ferrosilicon is a controlled-impurity ferroalloy in which aluminum content is restricted to reduced levels, typically below 0.5% and in some cases significantly lower, to prevent uncon...

Ferrosilicon FeSi72 is an iron-silicon alloy with a nominal silicon content around 72 percent, employed in gray iron and ductile iron foundries to promote graphite formation and refine as-cast micr...

Ferro vanadium is an iron-vanadium master alloy used across the steel industry to introduce controlled amounts of vanadium into molten steel. As a micro-alloying addition, it enables producers to a...

Vanadium has earned its place among the most valued microalloying elements in steel production. Added in small but precisely controlled quantities, vanadium transforms the microstructure of steel i...

FeV80 is a high-grade ferro vanadium alloy with a nominal vanadium content of approximately 80 percent. It serves as a concentrated vanadium source for steelmaking, allowing metallurgists to achiev...

Procuring ferro vanadium is not a commodity purchase like buying scrap or bulk ferrosilicon. The vanadium content directly affects final steel chemistry, mechanical properties, and compliance with ...

Vanadium has long served as a critical microalloying element in modern steelmaking. In its ferroalloy form, ferro vanadium—commonly supplied as FeV50 with a nominal vanadium content around 50%—prov...