Ferro Vanadium FeV80 High Grade Alloy for Steel Production

What Is FeV80 Ferro Vanadium?

FeV80 is a high-grade ferro vanadium alloy with a nominal vanadium content of approximately 80 percent. It serves as a concentrated vanadium source for steelmaking, allowing metallurgists to achieve precise vanadium levels with smaller additive quantities compared to lower-grade alternatives.

Vanadium functions as a microalloying element in steel. When added in controlled amounts, it promotes grain refinement and precipitation strengthening through the formation of vanadium carbonitrides. These metallurgical effects improve both strength and toughness in finished steel products, making vanadium an essential addition for demanding applications.

FeV80 is typically supplied in lump or briquette form, packed in steel drums or bulk bags. The high vanadium concentration means that less total alloy weight is required to reach target vanadium levels in the melt, which can simplify handling and reduce furnace loading.

In practice, FeV80 is added to the steel bath during the refining stage or in the ladle after primary melting. The alloy dissolves readily at steelmaking temperatures, distributing vanadium uniformly throughout the melt. Because the addition mass is smaller than with lower-grade alternatives, operators can achieve target chemistry with less disruption to bath temperature and composition balance.

How FeV80 Differs from FeV50

The primary distinction between FeV80 and FeV50 lies in vanadium concentration. FeV80 contains a nominal vanadium content of approximately 80 percent, while FeV50 contains approximately 50 percent vanadium. This difference has practical implications for steel production.

With FeV80, less alloy mass is needed to achieve the same vanadium contribution to the steel bath. For example, to add one unit of vanadium to a heat, the required FeV80 weight is roughly 60 percent of the FeV50 weight needed for the same vanadium addition. This reduced alloy volume can be advantageous in operations where furnace capacity or charge weight is constrained.

FeV80 is generally favored for high-performance steel grades where precise control over residual elements and total alloy input matters. FeV50 remains widely used for general structural steels and applications where the lower concentration is not a limiting factor. The choice between grades depends on the steel grade specification, furnace practice and economic considerations specific to each melt shop.

Industries That Require FeV80

FeV80 is primarily consumed by producers of high-performance steels where vanadium plays a critical role in meeting mechanical property targets.

Tool Steel Manufacturers. Tool steels rely on vanadium to develop fine, hard carbides that enhance wear resistance and maintain cutting edge performance. High-speed steels, in particular, require substantial vanadium additions to achieve the red hardness and abrasion resistance needed for cutting tools operating at elevated temperatures.

Specialty Steel Producers. Alloy steels for automotive components, aerospace fasteners and structural parts often specify vanadium to improve strength-to-weight ratios and fatigue resistance. FeV80 allows these producers to hit narrow chemistry windows without introducing excessive amounts of other alloying elements.

Forging and Bar Steel Mills. Producers of forged crankshafts, connecting rods and transmission gears use vanadium-bearing grades to achieve the combination of core toughness and surface hardness required for these critical components.

Rail and Heavy Plate Mills. Some rail grades and high-strength plate specifications incorporate vanadium to improve weldability while maintaining strength, particularly in thermomechanically processed products.

Specifications Available

FeV80 is offered in forms suitable for various furnace types and charging practices. Standard supply forms include lumps and briquettes, with sizing available to match customer requirements for induction furnaces, EAF operations or ladle additions.

Typical nominal composition for FeV80 includes vanadium content at approximately 80 percent, with controlled limits on carbon, silicon, sulfur, phosphorus and aluminum. Exact composition ranges are subject to confirmation against the specific requirements of each order. ZhenAn can supply material with certificates of analysis reflecting the tested composition of each lot.

Packaging options include steel drums, one-ton bulk bags and other configurations to suit customer handling equipment and storage conditions. Custom packaging arrangements can be discussed for recurring orders.

Testing and Quality Confirmation

Each batch of FeV80 undergoes composition testing to confirm vanadium content and trace element levels. Testing is performed using industry-standard analytical methods, with results documented in certificates of analysis supplied with each shipment.

Customers may specify additional testing requirements, including independent laboratory verification or specific sampling protocols. ZhenAn can accommodate third-party inspection arrangements at loading or upon arrival, subject to prior agreement.

Visual inspection for foreign matter, proper sizing and packaging integrity is performed before release. Material identification and lot traceability are maintained throughout handling to ensure that test certificates correspond to the delivered product.

Packaging and Logistics

FeV80 is packaged to preserve alloy quality during transit and storage. Standard export packaging uses moisture-resistant steel drums or woven polypropylene bulk bags with inner liners. Proper packaging prevents contamination and moisture pickup, both of which could affect alloy performance during furnace addition.

Shipping arrangements are tailored to order volume and destination. Container loads, breakbulk shipments and combined cargo options are available. Lead times vary based on current order backlog and destination; confirming requirements early allows for optimal scheduling.

For buyers with recurring requirements, ZhenAn can discuss scheduled delivery programs that align alloy shipments with production campaigns. This approach reduces inventory holding and ensures fresh material is available when needed.

Get FeV80 Specifications and Delivery Confirmation

ZhenAn supplies high-grade FeV80 ferro vanadium to steel producers requiring consistent alloy quality and reliable delivery schedules. Whether you need a specific vanadium range, custom sizing or scheduled deliveries aligned with your melt shop program, we can confirm availability and timing.

To receive a detailed quotation, include the following in your inquiry:

• Target vanadium grade and composition requirements
• Required quantity per shipment and annual volume
• Preferred alloy form (lump / briquette) and size range
• Packaging preference (drums / bulk bags)
• Destination port or delivery terms
• Required delivery schedule or preferred shipping window

Contact ZhenAn directly:

WhatsApp: +86 15518824805

Email: info@zaferroalloy.com

Our team will review your specifications and confirm available grades, current stock position and estimated lead time within one business day.

Send Inquiry Now