Home - Knowledge - Details

Chinese Export Silicon Metal Offer for February 6: Grade Prices Explained

Overview of the February 6 Chinese Silicon Metal Offer

The offer published by Chinese silicon metal producers on February 6 sets out five standard grades - 421, 2202, 3303, 441 and 553 - all quoted in US dollars per tonne. The sheet is issued as a working reference for aluminium alloy plants, ferrous foundries and chemical converters that buy silicon metal in container lots, and it reports the tax-inclusive quotation alongside the FOB China price so that a buyer can compare origins without re-quoting the material. Silicon metal prices move with power tariffs in the smelting provinces, with quartz feedstock availability and with demand from the aluminium and silicone sectors, which is why a monthly or fortnightly price sheet is more useful than a single annual contract figure.

How the Chinese Grade Numbers Work

Chinese silicon metal is designated by a three or four digit code in which the digits state the maximum iron, aluminium and calcium content in that order, following the GB/T 2881 convention. Grade 553 therefore means Fe 0.5 %, Al 0.5 % and Ca 0.3 %; grade 441 means Fe 0.4 %, Al 0.4 % and Ca 0.1 %; grade 3303 means Fe 0.3 %, Al 0.3 % and Ca 0.03 %; and grade 2202 means Fe 0.2 %, Al 0.2 % and Ca 0.02 %. Grade 421 sits between 441 and 3303 in calcium control, with an iron limit of 0.4 % and an aluminium limit of 0.2 %. The tighter the iron and calcium limits, the more refining and ladle treatment the metal needs, and the higher the quotation becomes.

FOB China Price Ranges Quoted on February 6

Grade Price range (USD/tonne)
421 2800 – 2860
2202 4250 – 4350
3303 2760 – 2810
441 2720 – 2770
553 2540 – 2580

The spread across the sheet is wide because the grades are not interchangeable. Grade 553 is the general-purpose metallurgical grade used for aluminium alloying and for deoxidation in steel; grades 441 and 421 are chosen where aluminium and calcium residuals have to stay low; grade 3303 is the usual chemical-grade feed for silicone monomer synthesis; and grade 2202 is the cleanest grade listed and is directed at high-purity chemical use. Grade 2202 carries the highest quotation on the sheet for that reason.

Reading the Quotation Basis

The sheet reports two bases: a quotation including tax, and the FOB China price. FOB means the seller places the cargo alongside the vessel at the named Chinese port, while the buyer carries ocean freight, insurance and import duties. Because tax treatment differs between buyers and destinations, the tax-inclusive figure should only be compared with the FOB figure once the export documentation for the specific order has been settled. Buyers commonly convert each range into a single planning figure at its midpoint, then close the final price against the confirmed chemical analysis of the heat that will actually ship.

Specification Checks Before Ordering

Chemical analysis: Si, Fe, Al and Ca reported per heat on a mill certificate, not copied from the offer sheet.

Size grading: agreed lump size band for furnace or ladle additions, with an undersize limit per lot.

Condition: metal must be dry and free of visible slag, fines or foreign contamination.

Packing: one tonne jumbo bags are the normal export packing, with 25 kg bags available for smaller consumers.

Loading: a 20 ft container usually takes a full 25 tonne payload when the bags are stowed and weighed correctly.

Applications Behind the Grade Choice

Aluminium alloy plants add silicon metal to make Al-Si casting and wrought alloys, where silicon content controls fluidity and shrinkage behaviour. Silicone producers dissolve chemical-grade silicon to build organosilicon intermediates, and in that route aluminium and calcium residuals affect catalyst life and yield. Ferrous foundries use silicon metal where a low-carbon silicon addition is required and ferrosilicon would introduce too much iron or carbon. Refractory and powder metallurgy consumers buy fine-graded silicon metal, while polycrystalline silicon producers need the cleanest feed available. Matching grade to process is the first cost decision, because over-specifying raises the purchase price without improving the finished product.

Frequently Asked Questions

Q: What does the grade number 553 mean in Chinese silicon metal?
The three digits give the maximum iron, aluminium and calcium content in order, so 553 means Fe 0.5 %, Al 0.5 % and Ca 0.3 %.

Q: Which grade is used for aluminium alloying?
Grade 553 and grade 441 are the common choices for aluminium alloying; grade 553 covers general casting alloys, while 441 is selected when residuals must be lower.

Q: Why is grade 2202 priced far above grade 3303?
Grade 2202 limits iron and calcium to 0.2 % and 0.02 %, which requires extra refining, so the February 6 quotation for 2202 is more than 1400 USD per tonne above the 3303 range.

Q: What does FOB China mean for the buyer?
It means the price covers delivery alongside the vessel at the Chinese load port; ocean freight, insurance and import charges are on the buyer's account.

Q: How is the price range in the sheet used in practice?
Buyers take the midpoint for budgeting, then agree a final figure against the confirmed analysis, size grading and packing of the actual shipment.

Q: Which grade suits silicone monomer production?
Grade 3303 is the standard chemical-grade feed for silicone monomer synthesis, where controlled aluminium and calcium levels support stable catalyst performance.

Send Inquiry

You Might Also Like