Metallurgical Ferro Titanium

Ferrotitanium is used as a deoxidizing and degassing component in the production of steel.

Send Inquiry

Description

video display

Products Description

TITANIUM (Ti) is added for carbide stabilization especially when the material is to be welded. It combines with carbon to form titanium carbides, which are quite stable and hard to dissolve in steel, which tends to minimize the occurrence of inter-granular corrosion. Adding approximately 0.25/0.60% titanium causes the carbon to combine with titanium in preference to chromium, preventing a tie-up of corrosion-resisting chromium as inter-granular carbides and the accompanying loss of corrosion resistance at the grain boundaries. However, the us of titanium has gradually decreased over recent year due to the ability of steelmakers to deliver stainless steels with very low carbon contents that are readily weldable without stabilization. In cast iron if introduce titanium 0.05-0.25% will promote fine till medium graphite grain size. If introduce more than 0.25% will create the high stability Titanium Carbide and will not be brittle during heat treatment, thus the cast iron that need heat treatment should not have Ti over than 0.25%, if add Titanium at low level will help to form the primary graphite. Titanium will be detrimental to forming spheroid graphite, the percentage should not be over than 0.04%. Titanium will raise the eutectic temperature but will decrease the carbon content at eutectic point.

ferro titanium 6

In gray iron, a small percentage promotes graphitisation. Titanium is highly reactive in steelmaking and combines readily, and forms stable compounds with carbon, oxygen, nitrogen and sulphur. Because of its reactivity, it may be used to fix these elements, reducing or eliminating their sometimes harmful effects.

Product parameters

percentage	Ti	Al	Si	P
FeTi30AB	25.0~35.0	8-8.5	4.5-5	0.05-0.06
FeTi40AB	35.0~45.0	9-9.5	3.5-4	0.03-0.04
FeTi70AB	65.0-75.0	3-5	1-4	0.04-0.06

company profile

Zhen An International Co., Limited. Our company have so many raw materials for metallic mould. We have specialized in metallurgical & refractory materials for more than 30 years. We are manufacturer and trader. Different products must have different requirements according to their unique characteristics. We are very willing to customize as your requirement and provide quality metallic alloys and non-ferro materials.

202309011356447112