What Details Should You Pay Attention To When Using Ferro Silicon Nitride Lump10-50mm ?

What details should you pay attention to when using ferrosilicon nitride?

Ferrosilicon nitride has a wide range of applications and plays different roles in different application fields. For example, it helps to improve the plugging performance of blast furnace mud and can increase the iron trench in iron trench materials. The amount of iron flux. In addition, ferrosilicon nitride can also be divided into ferrosilicon nitride for refractory materials and ferrosilicon nitride for steelmaking according to different uses. No matter where you want to apply ferrosilicon nitride and to exert its effect, you need to pay attention to some details during use.

 

 

Ferrosilicon nitride is a mixture of silicon nitride and iron. At temperatures of 900 degrees Celsius, its structure changes, resulting in a reduction in strength. Therefore, you need to pay attention to temperature control when using it to avoid being in a high temperature state for a long time.

 

 

The surface of ferrosilicon nitride needs to be kept clean and free of obvious foreign matter. Surface quality should be checked before use to ensure there are no impurities and contaminants.

 

 

The particle size of ferrosilicon nitride will also affect its effectiveness. For example, the particle size of ordinary ferrosilicon nitride used for refractory materials is 200 mesh, while the particle size of stabilized ferrosilicon nitride used for refractory materials is 325 mesh. Therefore, the appropriate particle size needs to be selected according to the specific use.

 

 

During storage and use, it is necessary to avoid contact between ferrous silicon nitride and water, acid, alkali and other substances to avoid chemical reactions. At the same time, avoid prolonged exposure to air to avoid moisture and oxidation.

 

 

When using ferrous silicon nitride, you need to wear protective gloves, masks and other personal protective measures to avoid direct contact with skin and inhalation of dust.

 

 

In the process of using ferrosilicon nitride, it is necessary to operate in accordance with relevant regulations to avoid safety accidents caused by illegal operations. For different types of ferrosilicon nitride, please note that they cannot be mixed to avoid affecting the use effect.

 

Name	Ferrosilicon Nitride
Si	75%
Al	1.5-2.0%
C	0.2%
S	0.02%
P	0.04%
Shape	lump,granule, powder
Alloy	Yes.