What elements does molybdenum bar contain?
Leave a message
What elements does molybdenum bar contain?
Molybdenum bar is a metal product containing molybdenum. The main component is molybdenum, and other elements include iron, silicon, sulfur, etc. Molybdenum bar can be used to make various molybdenum alloys and is widely used in chemical, metallurgical, electronic and other fields.
Molybdenum is a rare metal with a very low content in the earth's crust. It usually exists in the form of ore and is mainly extracted from minerals such as molybdenum sulfide and molybdenum oxide. The main component of molybdenum bar is this rare metal molybdenum, which can be used to make high temperature and corrosion resistant alloy materials with high industrial value.
In addition to molybdenum, molybdenum bars may also contain some other elements, mainly to improve the performance of the alloy. Common added elements include iron, silicon, sulfur, etc. Iron is a common metal element that can increase the strength and hardness of the alloy; silicon is a non-metallic element that can improve the oxidation resistance of the alloy; sulfur can also improve the processing performance and corrosion resistance of the alloy.
In addition, molybdenum bars may also contain trace amounts of other elements, such as copper, nickel, cobalt, etc. These elements can be added according to the specific alloy formula to meet the requirements of different industrial fields. For example, nickel can improve the corrosion resistance and oxidation resistance of the alloy; cobalt can improve the strength and hardness of the alloy.
In general, molybdenum bars mainly contain molybdenum, a rare metal, and some other metal and non-metal elements. Through alloying, various molybdenum alloy materials with excellent performance that meet industrial needs can be obtained. These molybdenum alloys have broad application prospects in the fields of chemical industry, metallurgy, electronics, etc., and can play a very high value.
How much is the processing fee of molybdenum bars per ton?
The processing fee of molybdenum bars depends on factors such as the equipment and process level of the processing plant, and the market supply and demand relationship. Generally speaking, the processing fee is between 1,000 and 5,000 yuan per ton.
First, the equipment and process level of the processing plant are important factors in determining the processing fee. The more advanced the equipment and process level, the higher the processing efficiency, the lower the cost, and the lower the processing fee. For metal materials such as molybdenum bars, multiple processes such as cutting, forging, and heat treatment are required. Advanced equipment and technology can improve processing efficiency, reduce processing costs, and thus reduce processing costs.
Secondly, the market supply and demand relationship will also have an impact on the processing fee. If the demand for molybdenum bars in the market is large and the processing plant has sufficient orders, the processing fee may be relatively low. On the contrary, if the market demand is insufficient and the processing plant is short of orders, the processing fee may rise.
In addition, the price of raw materials and the complexity of the processing technology will also affect the processing fee. Rising raw material prices will lead to rising processing costs, and the higher the complexity of the processing technology, the higher the processing fee.
In general, the processing fee of molybdenum bars is a complex issue affected by many factors and cannot be simply expressed by a fixed number. It needs to be determined based on market conditions and the actual situation of the processing plant. Giving a range is also to better understand the approximate level of processing costs. The specific processing costs need to be negotiated according to the actual situation.
Specification:
| Products | Molybdehum rods, bars |
| Name of material |
Molybdenum ( Pure): Mo>=99.95% TZM: 0.5% Ti / 0.08% Zr / 0.01-0.04 C Molybdenum lanthanum alloy: 0.3% - 0.6% La2O3 |
| Density at 20 degree |
>=10.18g/cm3 |
| Size | Dia: 2.5-120mm |
| Surface | Black, Cleaned, Machined, Polished, ground. |
| Application |
Glass melting electrodes, injection molding, in the field of device and machining technology or in the lighting industry |
