Why Ferrosilicon Has Low Carbon Content
Leave a message
What Ferrosilicon Is
Ferrosilicon is an iron-silicon alloy made by reducing quartz with carbon in a submerged arc furnace. Standard grades include FeSi75, FeSi72 and FeSi65, named for their nominal silicon content of about 75%, 72% and 65%, with the balance largely iron.
It is used to deoxidise steel, to add silicon, and as an inoculant in cast iron, and its behaviour depends on both the silicon content and the level of impurities.
The Furnace Reaction
In the furnace, silica is reduced by carbon at high temperature to form silicon, which dissolves into the molten iron. The reaction consumes carbon to produce carbon monoxide gas, which leaves the system rather than staying in the alloy.
Because carbon is consumed and removed as gas, very little remains dissolved in the final ferrosilicon. The process is self-cleaning with respect to carbon, which is the core reason the alloy is low in carbon.
Silicon and Carbon Solubility
Silicon-rich alloys have a limited capacity to hold carbon in solution, especially as they cool. As the alloy solidifies, the small amount of carbon present tends to form carbides that separate out rather than remain in the silicon-rich matrix.
The result is a finished alloy with carbon typically well below one percent, which is very low compared with high carbon ferroalloys such as ferromanganese or ferrochrome.
Why the Low Carbon Level Matters
Late deoxidation: the alloy can be added without raising the carbon content of the heat.
Low-carbon steels: it suits grades where carbon must be held at very low levels.
Silicon addition: silicon can be adjusted accurately without disturbing carbon control.
Cast iron inoculation: it provides silicon without adding unwanted carbon.
Related Grade Notes
FeSi75 delivers the most silicon per tonne and is the common choice for steelmaking and inoculation, while FeSi72 and FeSi65 offer slightly lower silicon content with correspondingly different density and dissolution behaviour. All standard grades remain low in carbon, so the choice among them is driven by silicon content and cost rather than by carbon.
Frequently Asked Questions
Q: Why is ferrosilicon low in carbon?
Because carbon is consumed during the furnace reduction and leaves as carbon monoxide gas, and the silicon-rich alloy can hold little carbon in solution.
Q: What grades are standard?
FeSi75, FeSi72 and FeSi65, named for their nominal silicon contents of about 75%, 72% and 65%.
Q: Can ferrosilicon be added late in the heat?
Yes. Its low carbon level means it can be used for deoxidation and silicon adjustment without disturbing carbon control.
Q: Is ferrosilicon used in cast iron?
Yes. It is widely used as an inoculant to add silicon and control structure.
Q: Does every grade have low carbon?
Yes. Standard ferrosilicon grades are all low in carbon; the choice between them is based on silicon content and cost.

