Home - Knowledge - Details

Turkish Chrome Ore Outboard Prices: Cr2O3 Grade Ladder, Sampling Rules and Price Drivers

How Turkish Chrome Ore Is Quoted

Chrome ore from Turkey is traded on a grade ladder. Offers are published as a mainstream quotation range and as a transaction range, both expressed in US dollars per tonne at the loading port, which is what the term outboard price describes: the value of the cargo alongside the vessel at the port of shipment, before the ocean freight is added. In the reference assessment the ladder ran from 46-48 percent Cr2O3 down to 34-36 percent Cr2O3, with the two ends of each range representing the offer and the realistic traded level respectively.

Chrome ore grade (Cr2O3) Mainstream offer Transaction price
46 - 48% 365 - 370 360 - 365
40 - 42% 320 - 330 315 - 320
38 - 40% 300 - 310 295 - 300
36 - 38% 280 - 290 275 - 280
34 - 36% 260 - 270 255 - 260

Grade, Ratio and End Use: Why Cr2O3 Alone Is Not Enough

Chemical grade ore, metallurgical grade ore and refractory grade ore are not interchangeable even when the Cr2O3 figure matches. Metallurgical users, meaning ferrochrome smelters and stainless steel producers, care about the chromium to iron ratio because it determines how much chromium unit can be recovered per tonne of ore smelted, and they also watch the silica content because it increases slag volume and power consumption. Refractory users need a controlled silica and alumina balance and a coarse, dense lump. Chemical users want a clean, high-chromium feed with low iron. A quotation therefore has to be read together with the full analysis; two cargoes both at 42 percent Cr2O3 can be valued differently because of the ratio and gangue.

Sampling and Quality Verification

Because chrome ore is a bulk mineral traded on assay, sampling is a contractual subject in its own right. ISO 6153:1989, Chromium ores - Increment sampling, specifies the methods for taking samples of chromium ores at the places of dispatch and acceptance, and it is the reference point for designing the increment pattern, the number of increments and the reduction of the gross sample. In practice the buyer appoints an independent surveyor at the loadport, the increments are combined and reduced, and the resulting composite is analysed for Cr2O3, total iron, silica, alumina, magnesia, sulphur and moisture by an accredited laboratory. Contracts normally nominate an umpire laboratory and a tolerance for the difference between loadport and discharge assays, because that tolerance is what defines the price adjustment mechanism.

What Moves the Outboard Price

Four forces drive the Turkish outboard level. First, downstream ferrochrome and stainless steel operating rates in the main consuming region, since chrome ore is a furnace feed and its demand is derived almost entirely from alloy output. Second, competing supply: cargoes from South Africa, Kazakhstan, India and elsewhere set the substitution ceiling, and when freight from alternative origins is cheap the Turkish premium narrows. Third, inland logistics and port costs inside Turkey, including trucking from the mining districts to the export terminals, which can change the outboard number without any change in mine-gate value. Fourth, exchange rates and the cost of working capital while a cargo waits for a vessel, which sellers recover in the offer rather than the transaction level.

Reading the Two Ranges Correctly

The gap between the mainstream offer and the transaction range is not random noise; it is the negotiation space. A mill that receives only the offer range will consistently overestimate replacement cost, while a mill that tracks the transaction range can see where firm business actually cleared. The practical approach is to record both, note the grade, the port, the shipment month and the analysis, and then build a short internal history so that the next negotiation starts from observed transactions rather than from a single published figure.

Frequently Asked Questions

Q: What does outboard price mean for Turkish chrome ore?
A: It is the value of the cargo at the loading port in Turkey, delivered alongside the vessel, before ocean freight is added. It is quoted in US dollars per tonne for a defined Cr2O3 grade.

Q: Which grades of Turkish chrome ore dominate the assessment?
A: The ladder runs from 46-48 percent Cr2O3 down to 34-36 percent Cr2O3, with the highest grade commanding the highest quotation and the lower grades discounted in steps of roughly 15 to 20 USD per tonne per two-point grade band.

Q: Which standard governs chrome ore sampling?
A: ISO 6153:1989, Chromium ores - Increment sampling, which specifies the methods for taking samples at the places of dispatch and acceptance for determination of chemical composition and moisture.

Q: Why does the chromium to iron ratio matter more than Cr2O3 for a smelter?
A: Because the ratio sets how many chromium units can be recovered per tonne of ore charged. A high-iron ore of the same Cr2O3 grade yields less alloy and produces more slag, raising power and reductant consumption per tonne of ferrochrome.

Q: What should a buyer agree before shipment?
A: The grade basis and rejection floor, the increment sampling pattern, the loadport surveyor and analysing laboratory, the umpire laboratory, the moisture basis, and the price adjustment formula applied if the discharge assay differs from the loadport assay.

Send Inquiry

You Might Also Like