Home - Knowledge - Details

Vietnam Titanium Concentrate Quotation Levels: Reading TiO2 Grades, FOB Terms and Impurity Penalties

What Vietnamese Titanium Concentrate Buyers Actually Quote

Quotations for Vietnamese titanium concentrate are issued on a grade-by-grade basis rather than as a single national price, because the material comes from coastal heavy-mineral sands whose ilmenite, leucoxene and zircon content varies from deposit to deposit. In the reference window the two mainstream grades assessed were TiO2 above 50 percent and TiO2 above 54 percent, both offered on an FOB basis and both quoted in US dollars per tonne. For the reporting date the mainstream levels were 370 to 390 USD per tonne for TiO2 above 50 percent and 350 to 370 USD per tonne for TiO2 above 54 percent.

Grade Mainstream quotation Unit Terms
TiO2 above 50% 370 - 390 USD / tonne FOB
TiO2 above 54% 350 - 370 USD / tonne FOB

Why the Higher Grade Can Quote Lower

At first reading the table looks inverted, and buyers regularly ask why a higher head grade carries a lower number. The answer lies in what sits alongside the TiO2 figure. Heavy-mineral sand concentrates are priced on the whole package: iron oxide content, chromium and vanadium levels that affect downstream slag chemistry, silica and alumina gangue, the ratio of ilmenite to altered leucoxene, particle size distribution, and residual moisture. A nominally higher-grade cargo with a harder-to-treat mineralogy, a high iron-to-titanium ratio or an elevated moisture content can therefore clear at a lower number than a cleaner 50 percent cargo from a different deposit. Freight positioning at the loading port and the size of the cargo also shift the FOB level, because the seller nets the same delivered figure whichever way the logistics are packaged.

The Cost Drivers Behind a Titanium Concentrate Offer

Three factors dominate the quoted level. First, mining and wet-plant costs, including dredging, spiral and magnetic separation, and the diesel and electricity consumed at a coastal beneficiation site. Second, inland logistics and port charges in Vietnam, which are volatile and are frequently built into or excluded from an FOB number depending on the loading point. Third, downstream demand: the same concentrate feeds titanium dioxide pigment plants, titanium slag and synthetic rutile producers, titanium sponge plants and welding-electrode manufacturers, so the offer moves with the operating rates of those sectors rather than with any single end market. When pigment producers run down inventories, the first discounts appear in the lower-grade fractions; when slag furnaces restock, the mid-grade cargoes tighten first.

Sampling, Analysis and Contract Mechanics

Because the payable grade is the whole contract, inspection practice matters more than the headline number. Shipments should be sampled incrementally across the stockpile or the conveyor by an independent surveyor, and the resulting composite analysed by an accredited laboratory operating to ISO/IEC 17025. The standard package covers TiO2, total iron, Cr2O3, V2O5, SiO2, Al2O3, moisture and particle size. Moisture is normally determined by drying at approximately 105 degrees Celsius and reported separately, so that the commercial quantity can be converted to a dry metric tonne basis. Contracts should state the assay method, the umpire laboratory, the tolerance for grade variation between loading and discharge analysis, and the price adjustment formula that applies if the discharged TiO2 falls below the specified minimum.

A Buyer's Checklist Before Confirming a Cargo

Confirm whether the price is FOB, CFR or CIF and which port; confirm the grade basis as a minimum TiO2 with a rejection floor; confirm moisture and the dry-tonne conversion; confirm penalty elements and any caps on Cr2O3 and V2O5; confirm the size fraction required by your downstream process, since a furnace feed and a pigment feed tolerate very different distributions; and confirm documentary requirements, including certificate of origin, radiation clearance where applicable, and a full certificate of analysis issued against the loadport sample. A quotation that omits any of these points should be treated as indicative rather than firm.

Frequently Asked Questions

Q: What grades of Vietnamese titanium concentrate are normally quoted?
A: The mainstream grades are TiO2 above 50 percent and TiO2 above 54 percent, quoted in US dollars per tonne on an FOB basis, with shipment-specific grades agreed between buyer and seller.

Q: Why is the 54 percent grade sometimes quoted below the 50 percent grade?
A: Because price follows the full analysis, not the head grade alone. Impurity levels, iron-to-titanium ratio, mineralogy, particle size and moisture can make a higher-grade cargo less attractive to a given furnace or pigment plant.

Q: How should moisture be handled in the contract?
A: Moisture is determined by drying the sample at about 105 degrees Celsius, reported as a percentage, and used to convert the wet quantity to a dry metric tonne basis so that payment reflects the dry concentrate actually delivered.

Q: Which laboratory arrangements are acceptable for titanium concentrate?
A: An independent surveyor should take the increments and an accredited laboratory operating to ISO/IEC 17025 should issue the certificate of analysis, with a named umpire laboratory for grade disputes at discharge.

Q: What downstream users set the demand level for this material?
A: Titanium dioxide pigment plants, titanium slag and synthetic rutile producers, titanium sponge producers and welding electrode manufacturers, each of which requires a different grade and impurity profile.

Send Inquiry

You Might Also Like