Knowledge

Electrolytic manganese metal (EMM) is a high-purity manganese product manufactured through the electrolysis of purified manganese sulfate solution. It is commonly produced in the form of flakes or pow

Petroleum coke is classified by structure into needle, sponge, shot and fluid coke, and by sulphur content into high and low sulphur families, with each type routed to a different industry. This guide

Calcined petroleum coke (CPC) is produced by heat-treating green petroleum coke at around 1200-1350°C to drive off volatile matter and restructure the carbon lattice. This article explains the raw mat

Calcined petroleum coke is produced by heat treating refinery green coke at roughly 1200-1350 C, which removes moisture and volatiles and raises true density to about 2.04-2.10 g/cm3. This guide expla

Graphite powder turns insulating rubber into a dissipative or conductive compound by forming a continuous filler network, which collapses volume resistivity by orders of magnitude at the percolation t

Defence and nuclear applications place graphite powder under requirements that industrial grades never see, above all a boron equivalent limit of the order of 0.5 ppm for moderator service. This artic

Graphite powder is used across process industries for chemical and petrochemical equipment such as heat exchangers and absorption towers, for casting moulds and metallurgical tooling, for powder metal

Graphite powder is graded by origin, crystal form, carbon content and particle size, and each axis points to a different industrial duty. Natural flake, amorphous, vein and synthetic grades differ in

Graphite powder is used in four main service families: refractory and crucible linings, conductive and current-carrying parts, dry lubrication and sealing, and protective dressing in steel ingot handl

Graphite powder behaves as it does because of its anisotropic layer lattice, which makes it soft between planes, conductive within them and very dimensionally stable under heat. This article sets out

Graphite powder is elemental carbon ground into flake, amorphous or synthetic grades whose fixed carbon ranges from about 50% to above 99.9%. This article sets out the chemical and size specifications