Optical Grade Metal Silicon: European DDP Price and Application Guide
Leave a message
What Optical-Grade Metal Silicon Is
Metal silicon, also called metallurgical silicon, is produced by carbothermic reduction of quartz in a submerged arc furnace and then refined to a controlled chemistry. Two commercial purity levels dominate the optical and optoelectronic supply chain: 98.5% Si and 99% Si. The 98.5% grade is the volume workhorse for general optical and metallurgical duties, while the 99% grade carries lower residual iron, aluminium and calcium and is preferred where optical or electronic performance is sensitive to trace impurities. Material is normally supplied as lump, with the grain-size fraction agreed between buyer and supplier so the charge melts evenly and dissolves at a rate that matches the downstream process.
European DDP Price Reference
The quotation below is a European reference for delivered duty paid (DDP) business. Figures are expressed in EUR per tonne and are a market reference point rather than a binding offer.
| Specification (Si) | Quotation | Change | Unit | Terms |
|---|---|---|---|---|
| 98.5% | 3,000-3,100 | -- | EUR/ton | DDP |
| 99% | 3,100-3,300 | -- | EUR/ton | DDP |
Reference date: 6 June 2023. The gap between the two grades reflects the extra refining steps and the tighter limits on residual elements that are needed to reach 99% silicon.
Why Silicon Suits Optical and Infrared Systems
Silicon combines a high refractive index with low scattering loss, so relatively thin, lightweight elements can redirect and focus radiation efficiently. In the infrared region silicon transmits over a broad band and is used as a window and lens material, while its mechanical strength and thermal stability let it survive the temperature cycling of industrial equipment. The same properties that make silicon useful in optics also underlie its long-established role in aluminium alloying and steel deoxidation.
Optoelectronic Devices and Night-Vision Components
Optoelectronic components rely on silicon for photodiodes, imaging structures and night-vision devices. The material offers high reaction speed, which supports short switching and read-out times, and good stability, which keeps response characteristics consistent over long service intervals and helps raise overall device performance. Where such devices must work in humid or corrosive surroundings, the silicon surface is passivated with a stable dielectric layer to protect the active area.
Coating, Wear and Aerospace Applications
Metal silicon also serves as a coating feedstock. Silicon-bearing coatings protect and improve metal surfaces, adding resistance to corrosion and to mechanical wear, which extends the life of parts exposed to abrasion or chemical attack. In the aerospace sector silicon is an input to superalloys and high-strength materials; its resistance to high-temperature oxidation helps components retain strength in hot sections. In optical manufacturing silicon is shaped into lenses and mirror substrates, where its high refractive index and low scattering improve the performance of the finished device.
Supply, Technical Support and Customisation
Because optical and optoelectronic users specify chemistry rather than order a single commodity grade, supply is built around agreed specifications: purity level, residual-element limits, lump size and packing. A manufacturer with in-house refining and screening can hold those limits from batch to batch and adapt the product to a customer's melting practice, giving consistent dissolution and predictable yields across repeat orders.
FAQ
Q: Which purity levels of metal silicon are quoted for the European market?
The reference quotation covers 98.5% Si at 3,000-3,100 EUR per tonne and 99% Si at 3,100-3,300 EUR per tonne, both on a DDP basis.
Q: What does DDP mean in this quotation?
DDP means delivered duty paid: the figure includes delivery to the agreed destination and import duty, so it is not an ex-works price.
Q: Why does 99% silicon cost more than 98.5% silicon?
Reaching 99% purity requires additional refining and tighter control of iron, aluminium and calcium, which raises processing cost per tonne.
Q: Which optical duties use metal silicon?
Silicon is used for infrared windows and lenses and as a substrate material, thanks to its high refractive index, low scattering and broad infrared transmission.
Q: How does silicon help optoelectronic devices?
It provides the active material for photodiodes and imaging structures, with high reaction speed and stability that support night-vision and sensing equipment.
Q: Can lump size and chemistry be customised?
Yes. Purity level, residual-element limits and grain-size fraction are agreed per order so the material matches the customer's melting and casting practice.
Q: Is metal silicon used outside optics?
It is also used in coatings for corrosion and wear protection and as an input to aerospace superalloys and high-strength materials.

