Home - Knowledge - Details

High Carbon Ferrochrome Spot Price on January 3: Historical Grade and Procurement Reference

High Carbon Ferrochrome Spot Price on January 3

 

High carbon ferrochrome is a chromium-bearing ferroalloy used mainly to add chromium to stainless steel and other alloy-steel melts. The page reviewed here records a price reference dated January 3, 2023. The table is historical market information and must not be treated as a current quotation for a later purchasing date. A current offer needs a new date, a defined grade, a commercial basis and a stated validity period.

 

A spot price is not a single universal value for all high carbon ferrochrome. It applies to a defined composition, size, quantity, origin, delivery location and settlement basis. If the grade, freight term or quality limits change, a direct comparison can produce a misleading conclusion.

 

Historical January 3 Reference Table

 

Origin shown on page Grade description Spot price reference Transaction price reference
India Cr 60%, Si 4% 8,900–8,950 8,850–8,900
Kazakhstan Cr 70%, Si 0.5% 9,800–9,900 9,800–9,900
Southern African origin Cr 58%, Si 3–4% 8,800–8,900 8,800–8,850

 

The source page does not state the currency, price unit, named delivery location, freight basis, payment terms, lot quantity or validity period. The figures must therefore remain labelled as historical reference data. A buyer should not convert them into a current price without confirming the missing commercial information and the date of the new offer.

 

How to Read the Grade Information

 

The table identifies chromium and silicon content, but a purchasing specification normally needs more information. High carbon ferrochrome contains iron, chromium and carbon, together with silicon and residual elements such as phosphorus and sulfur. The source page describes high carbon ferrochrome broadly as containing about 4–8% carbon. That description does not replace a grade-specific chemical specification.

 

Chromium: determines the chromium units supplied per tonne and influences the alloy addition rate.

 

Carbon: must be compatible with the target steel grade and refining practice.

 

Silicon: affects the melt balance and should be compared on the same guaranteed basis.

 

Phosphorus and sulfur: may affect steel cleanliness and refining cost, so maximum values should be written into the order.

 

Size distribution: lump range, fines and oversize influence charging, dust generation and recovery.

 

Moisture and packaging: affect net weight, storage and handling results.

 

Spot Price Versus Transaction Price

 

A spot reference indicates a market level for prompt business. A transaction price is the negotiated value of a specific shipment. The difference can result from quantity, payment security, inspection, origin, stock availability, shipment timing, quality concessions or logistics. These two numbers should not be treated as interchangeable.

 

Commercial terms must be normalized before a buyer compares suppliers. FOB, CFR, CIF and delivered prices contain different freight, insurance and risk responsibilities. The buyer should record the named port or destination, currency, price unit, payment terms, inspection arrangement, shipment window and quotation validity. If one offer is at the loading port and another is delivered to the receiving plant, the relevant comparison is landed cost rather than the headline unit price.

 

Effective Cost of Chromium Units

 

Chromium percentage alone does not determine the lowest effective purchasing cost. A practical comparison considers the chromium content, the receiving plant's actual recovery, handling loss, slag formation, fines, freight, insurance, port charges, duties and inland transport. The useful question is how much usable chromium reaches the melt for the total delivered expenditure.

 

For example, a higher chromium grade may reduce the tonnes of alloy required, but a higher price, different silicon level or more restrictive delivery basis can change the result. Buyers should calculate the result using their own furnace recovery data rather than applying a generic recovery assumption that has not been measured in their process.

 

Why Ferrochrome Prices Change in January

 

Early-year price references can reflect inventory planning, restocking, contract negotiations and changes in mill operating rates. The main physical cost drivers include chromium-bearing raw materials, reductants, electricity, electrodes, maintenance, labour, environmental controls and furnace utilization. Availability can also change when production is reduced or transport capacity is constrained.

 

Demand is closely connected with stainless-steel production because chromium is essential to stainless grades. Stainless output, mill inventories, import requirements, currency movements and ocean freight can influence regional price differences. A useful market record should preserve the date, source, grade and commercial basis of every observation instead of combining several dates into one undated price claim.

 

Sampling and Chemical Analysis

 

A price comparison is only dependable when the material behind the price is sampled and tested consistently. ISO 4551 addresses sampling and sieve analysis for ferroalloys. ISO 4552-1 addresses sampling and sample preparation for chemical analysis of ferrochromium and related ferroalloys. These procedures are important because segregation, lump-size variation and fines can cause a small or poorly selected sample to misrepresent the full shipment.

 

The buyer and supplier should agree on the sampling point, number of increments, sample preparation, laboratory, test method and referee procedure before shipment. ASTM E363 provides a chemical-analysis reference for chromium and ferrochromium. The certificate of analysis should identify the lot number, reported elements, units, analytical method and sampling record. If the buyer's result differs from the supplier's certificate, the previously agreed referee process should govern the resolution.

 

Procurement Checklist

 

Define chromium grade and maximum values for carbon, silicon, phosphorus and sulfur.

 

Define lump size, fines, oversize, moisture, packaging and allowable foreign material.

 

State currency, price unit, Incoterm, named location, quantity and quotation validity.

 

Request a lot-specific certificate of analysis and agree sampling under ISO 4551 or ISO 4552-1 where applicable.

 

Confirm the analytical method and referee laboratory before shipment.

 

Compare landed cost and effective chromium cost using the receiving plant's recovery basis.

 

Keep the January 3, 2023 table separate from current offers and date every new market reference.

 

Frequently Asked Questions

 

What date does the price table represent?
The page identifies the reference as January 3, 2023. It is historical information and should not be presented as a current market price.

 

Does the table state a currency or price unit?
No. The page lists numeric ranges but does not state the currency, unit, delivery location or validity period. Those items must be obtained before using the data for procurement.

 

Why are the India, Kazakhstan and Southern African references different?
The listed grades have different chromium and silicon contents, and origin can also change raw-material cost, energy exposure, logistics and availability. The figures are not directly comparable without a common commercial basis.

 

What chemistry should be written into a purchase order?
The order should specify chromium, carbon, silicon, phosphorus and sulfur requirements, together with size, fines, moisture and packaging. The acceptance limits should come from the agreed grade and the receiving steelmaking process.

 

How should a buyer compare spot and transaction prices?
A spot price is an indicative level for prompt material, while a transaction price is the negotiated value of a defined deal. Compare them only after normalizing grade, quantity, payment, inspection, shipment timing and delivery basis.

 

How should ferrochrome be sampled?
Sampling should represent the full shipment and follow the agreed ferroalloy procedure. ISO 4551 addresses sampling and sieve analysis, while ISO 4552-1 addresses sampling and sample preparation for chemical analysis of ferrochromium.

 

How is chromium content verified?
The parties should agree on the laboratory and analytical method before shipment. ASTM E363 provides a chemical-analysis reference for chromium and ferrochromium, and the result should be traceable to the sampled lot.

Send Inquiry

You Might Also Like