Silicon Calcium FOB Price in China: Ca30Si60 and Ca28Si58 Quotes for February 14
Leave a message
What the February 14 Silicon Calcium FOB Price Covers
Silicon calcium, also written calcium silicon, is a calcium-bearing ferrosilicon alloy consumed mainly by steelmakers and iron foundries. The table below reproduces the FOB China quotation published for February 14 in United States dollars per ton for the two commercial grades that move most frequently in export trade. Under FOB terms the seller places the cargo on board the vessel at the Chinese port of loading, so the quoted number covers the alloy and inland movement to the port but not ocean freight, marine insurance or import duty at destination.
Grade-by-Grade FOB Quotation
| Product | Grade | FOB price (USD/ton) |
|---|---|---|
| Silicon calcium | Ca30Si60 | 1850-1950 |
| Silicon calcium | Ca28Si58 | 1830-1930 |
Both lines describe the same alloy family and differ only in the nominal calcium and silicon levels encoded in the grade designation. Ca30Si60 ranks above Ca28Si58 in calcium content, and that step shows up in the quotation as a flat 20 USD/ton offset between the two ranges: 1850 against 1830 at the low end and 1950 against 1930 at the high end.
How the Two Grades Behave in the Ladle
Calcium is the active element in this alloy. Added to liquid steel it combines with oxygen and sulphur and lifts their reaction products into the slag, which is why silicon calcium is bought as a combined deoxidiser and desulphuriser rather than as a plain source of silicon. The calcium fraction also modifies non-metallic inclusions, discouraging the elongated alumina stringers that impair ductility in rolled and forged product.
In foundry work the same alloy acts as an inoculant in grey and ductile iron. Nodularity, graphite shape and chill depth all respond to the calcium and silicon balance, so a foundry that switches from Ca28Si58 to Ca30Si60 is usually chasing a change in nucleation behaviour rather than a cheaper silicon unit. Matching the grade to the treatment practice matters more than chasing the lowest quotation band.
Reading the Quotation Bands Correctly
Both rows are ranges, not single prices. The distance inside a range reflects how much the price moves with order size, calcium analysis requested and the shipping window.
The two grades are priced on the same timing basis, so they can be compared directly without adjusting for currency or delivery.
Prices are quoted per metric ton of alloy, not per ton of contained calcium. Two suppliers can therefore quote the same band while delivering different value per ton.
FOB numbers exclude freight, so a buyer comparing offers landed at a European or Asian port must add the segment costs before deciding which offer is cheaper.
Factors That Move Silicon Calcium Prices
Silicon calcium is an electricity-intensive product, so smelting power tariffs and the availability of calcium-bearing feedstock sit behind most week-to-week movement. Seasonal power arrangements in producing regions, changes in reducing-agent costs, furnace maintenance outages and the balance between domestic steel demand and export enquiries all feed into the published band. Freight and port conditions do not change an FOB figure directly, but they change how attractive that figure looks to an overseas buyer, which in turn shifts enquiry flow and supports or erodes the quoted range.
Because the two grades share a production route, their quotations tend to move together. A widening gap between Ca30Si60 and Ca28Si58 is normally a signal about calcium-rich feed availability or about a specific order book, not about silicon costs in general.
Ordering, Packaging and Inspection
Export consignments are normally shipped in bulk bags or in drums according to customer requirement, with the size range agreed before booking. Buyers should fix the following points in the purchase order so that the delivered cargo matches the quotation: the exact grade, the lump size band, the packing format, the analysis tolerances acceptable for calcium, silicon, aluminium and carbon, and whether a third-party inspection certificate is required at loading. Sampling and analysis method should also be named, because two laboratories using different preparation routes can report different calcium values on the same lot.
Where a buyer intends to run trials before committing to volume, the usual practice is to book a single container or a part cargo of one grade, verify the dissolution behaviour and recovery in the ladle, and then convert to a regular schedule. That approach protects the buyer from carrying a grade that does not suit the treatment practice, and it gives the supplier a clear basis for holding a quotation band on repeat orders.
FAQ
Q: What was the FOB China price of silicon calcium on February 14?
Ca30Si60 was quoted at 1850-1950 USD/ton and Ca28Si58 at 1830-1930 USD/ton, both on an FOB China basis.
Q: What is the price difference between Ca30Si60 and Ca28Si58?
The quotation ranges are offset by a flat 20 USD/ton, comparing 1850 with 1830 at the bottom of each range and 1950 with 1930 at the top.
Q: Which grade should a steel mill choose?
Choose on calcium requirement and treatment practice. Ca30Si60 suits work that needs more calcium for inclusion modification; Ca28Si58 is the standard choice where the silicon contribution matters as much as the calcium.
Q: Do the quoted prices include freight and insurance?
No. FOB terms cover the alloy and loading on board at the Chinese port. Ocean freight, insurance and destination charges are payable by the buyer.
Q: Are the two grades made by the same process?
Yes. Both are smelted from the same raw material family, which is why their quotations normally move in step and why the gap between them stays narrow.
Q: What should be specified when placing an order?
Grade, lump size, packing format, required analysis tolerances and whether a third-party inspection certificate is needed, plus the agreed sampling and analysis method.
