Clean molybdenum rod

 

 

The clean molybdenum rod has been treated with alkali washing, and the surface is gray metallic luster and smooth. Alkali cleaning method, also known as "alkali cooking method", is a chemical cleaning method.

Add lye to water and remove dirt under certain pressure.

 

Alkaline solution can soften the dirt, and then use mechanical descaling methods. The descaling rate can generally reach 80%. Lye is a high-strength lye, usually made of sodium hydroxide and sodium carbonate or trisodium phosphate.

 

It can soften, loosen, emulsify and disperse the deposits of molybdenum rods, making the surface of the molybdenum rods appear metallic and shiny. smooth.

 

During alkaline cleaning, some surfactants are often added to increase the cleaning effect.

The surface of molybdenum rods is easily oxidized, so surface oxides should be removed during use. When treating surface oxides, strong acids (hydrofluoric acid, nitric acid, hydrochloric acid, etc.) can be used. If the surface is slightly oxidized, it can be cleaned with abrasive detergent, then wiped with a soft cloth or sponge, and finally washed with warm water.

 

 

 

Molybdenum rods have good high-temperature properties and are often made into high-temperature products for use in different high-temperature fields such as aerospace and industry. In addition, it also has good thermal conductivity, so it is often made into electronic components for use in the electronic field.

 

If you have any questions about molybdenum, please feel free to contact us via email: info@zaferroalloy.com or phone: +8615896822096.