Cored Wire For Steel Making

Specification

Core covered wire manufacturers can produce different core-covered wires according to user requirements, and core-covered wires are used for steelmaking. Such as calcium silicon core wire, silicon manganese calcium wire, calcium silicon calcium wire, aluminum calcium wire, calcium iron wire, pure calcium wire, etc.

Alloy cored wire is a composite material. Alloy core wire is made by pulverizing various additives added to molten steel or molten iron into a certain particle size, and then packaging it with cold-rolled low-carbon steel strips as a composite material of any length.

The core wire consists of steel cladding coated with alloy powder. It is wound on reels, resulting in roll weights of 100-3000 kg. Wire diameter is 3-18mm.

The core wire is dense and the powder is evenly mixed. The weight of the powder can be calculated in units of length (meters).

Core wire injection technology has replaced the single shot refractory powder injection method and has proven to be an indispensable method in secondary metallurgical processes.

Meeting the growing requirements for chemical elements in casting.

Faster processing time and more accuracy.

Very good repeatability.

What is the use of cored wire?

Cored wire is widely used in steelmaking technology.

1. It is beneficial to adjust and control the content of easily oxidized elements and trace elements, which can greatly increase the alloy yield, reduce smelting costs, shorten smelting time, and achieve accurate composition control.

2. It can make the molten steel pure and partially change the nature and shape of inclusions, improve the quality of molten steel and improve the casting state.

FAQ