Advanced Search
enLanguage
Home - Products - Silicon Metal - Details
Smelting Process Of Silicon For Chemical Industry
video
Smelting Process Of Silicon For Chemical Industry

Smelting Process Of Silicon For Chemical Industry

Granularity: customized according to customer requirements Packing: tons of bags, drums, etc.

Send Inquiry

Description

ZhenAn International Co., Limited is one of the most reliable manufacturers and suppliers of smelting process of silicon for chemical industry in China. With abundant experience, we warmly welcome you to wholesale discount smelting process of silicon for chemical industry in stock here from our factory. Quality products and reasonable price are available.

 

Products Description

The technological process of silicon for chemical use includes furnace charge preparation, electric furnace smelting, silicon refining and casting, and crushing for removing slag inclusions. All raw materials must undergo necessary treatment before the charge is prepared. The silica is crushed in the jaw crusher until the size of the pieces is not more than 100mm, and the pieces smaller than 5mm are screened out and washed with water. Because the fragments in the furnace are melted in the upper part of the furnace, the gas permeability of the charge is reduced, making the production process difficult. Petroleum coke has a relatively high electrical conductivity, so it must be broken to a size of no more than 10mm, and the amount of petroleum coke powder must be controlled. Because it burns directly on the furnace mouth, it will cause insufficient reducing agent.

 

In the production of chemical silicon, bituminous coal can completely replace charcoal, such as Hunan Zhuzhou refined bituminous coal, the fixed carbon reaches 77.19%, the volatile matter is 19.4%, the ash content is 3.41%, the Fe2O3 content is 0.22%, the Al2O3 content is 0.99%, and the CaO content is 0.17%. . According to production practice, it is feasible to use this kind of bituminous coal to smelt chemical silicon.

 

Blocks and chips for the production of silicon for chemical use are processed with timber cutters and wood chippers. The carbonaceous reducing agent in the furnace charge is mainly petroleum coke and bituminous coal, and the amount of wood blocks and wood chips depends on the furnace conditions. Wood is not used in production, but the product quality is more stable. The ratio of the charge is determined according to the grade of the product required to be produced. The proportion of petroleum coke and bituminous coal is determined according to the amount of carbon required for each batch of ore silicon. The ratio of petroleum coke and bituminous coal has a great influence on the working resistance of the charge.

 

After each component of the furnace charge is weighed, the charge is mixed evenly, and after the furnace is pounded, the uniformly mixed charge is added to the furnace. Keep a certain height of the material surface and feed evenly.

 

Chemical silicon production is continuous. The conditions inside the furnace are not eternal either. Chemical silicon production is a process in which electric energy is converted into heat energy in an electric furnace, and then the heat energy is used to directly heat the material to produce a chemical reaction. Therefore, the electrical characteristics in the furnace are very important. The smelting operation is closed-arc to maintain the high temperature furnace, improve the thermal efficiency, and improve the utilization rate of the electric furnace. In the research, a metal silicon furnace with a capacity of 3200KVA and 6300KVA is used. The smelting is carried out by simmering for a certain period of time and regular concentrated feeding. Under normal circumstances, it is difficult for the charge to sink automatically, and it is generally necessary to force the charge to sink. The furnace condition is easy to fluctuate and difficult to control. Therefore, it is necessary to judge correctly and deal with it in time in production. The furnace is fired every 4 hours for scouring and casting, and the slag is broken and sorted into storage.

 

Smelting process of silicon for chemical industry The technological process of silicon for chemical use includes furnace charge preparation, electric furnace smelting, silicon refining and casting, and crushing for removing slag inclusions. All raw materials must undergo necessary treatment before the charge is prepared. The silica is crushed in the jaw crusher until the size of the pieces is not more than 100mm, and the pieces smaller than 5mm are screened out and washed with water. Because the fragments in the furnace are melted in the upper part of the furnace, the gas permeability of the charge is reduced, making the production process difficult. Petroleum coke has a relatively high electrical conductivity, so it must be broken to a size of no more than 10mm, and the amount of petroleum coke powder must be controlled. Because it burns directly on the furnace mouth, it will cause insufficient reducing agent. In the production of chemical silicon, bituminous coal can completely replace charcoal, such as Hunan Zhuzhou refined bituminous coal, the fixed carbon reaches 77.19%, the volatile matter is 19.4%, the ash content is 3.41%, the Fe2O3 content is 0.22%, the Al2O3 content is 0.99%, and the CaO content is 0.17%. . According to production practice, it is feasible to use this kind of bituminous coal to smelt chemical silicon. Blocks and chips for the production of silicon for chemical use are processed with timber cutters and wood chippers. The carbonaceous reducing agent in the furnace charge is mainly petroleum coke and bituminous coal, and the amount of wood blocks and wood chips depends on the furnace conditions. Wood is not used in production, but the product quality is more stable. The ratio of the charge is determined according to the grade of the product required to be produced. The proportion of petroleum coke and bituminous coal is determined according to the amount of carbon required for each batch of ore silicon. The ratio of petroleum coke and bituminous coal has a great influence on the working resistance of the charge. After each component of the furnace charge is weighed, the charge is mixed evenly, and after the furnace is pounded, the uniformly mixed charge is added to the furnace. Keep a certain height of the material surface and feed evenly. Chemical silicon production is continuous. The conditions inside the furnace are not eternal either. Chemical silicon production is a process in which electric energy is converted into heat energy in an electric furnace, and then the heat energy is used to directly heat the material to produce a chemical reaction. Therefore, the electrical characteristics in the furnace are very important. The smelting operation is closed-arc to maintain the high temperature furnace, improve the thermal efficiency, and improve the utilization rate of the electric furnace. In the research, a metal silicon furnace with a capacity of 3200KVA and 6300KVA is used. The smelting is carried out by simmering for a certain period of time and regular concentrated feeding. Under normal circumstances, it is difficult for the charge to sink automatically, and it is generally necessary to force the charge to sink. The furnace condition is easy to fluctuate and difficult to control. Therefore, it is necessary to judge correctly and deal with it in time in production. The furnace is fired every 4 hours for scouring and casting, and the slag is broken and sorted into storage.Smelting process of silicon for chemical industry The technological process of silicon for chemical use includes furnace charge preparation, electric furnace smelting, silicon refining and casting, and crushing for removing slag inclusions. All raw materials must undergo necessary treatment before the charge is prepared. The silica is crushed in the jaw crusher until the size of the pieces is not more than 100mm, and the pieces smaller than 5mm are screened out and washed with water. Because the fragments in the furnace are melted in the upper part of the furnace, the gas permeability of the charge is reduced, making the production process difficult. Petroleum coke has a relatively high electrical conductivity, so it must be broken to a size of no more than 10mm, and the amount of petroleum coke powder must be controlled. Because it burns directly on the furnace mouth, it will cause insufficient reducing agent. In the production of chemical silicon, bituminous coal can completely replace charcoal, such as Hunan Zhuzhou refined bituminous coal, the fixed carbon reaches 77.19%, the volatile matter is 19.4%, the ash content is 3.41%, the Fe2O3 content is 0.22%, the Al2O3 content is 0.99%, and the CaO content is 0.17%. . According to production practice, it is feasible to use this kind of bituminous coal to smelt chemical silicon. Blocks and chips for the production of silicon for chemical use are processed with timber cutters and wood chippers. The carbonaceous reducing agent in the furnace charge is mainly petroleum coke and bituminous coal, and the amount of wood blocks and wood chips depends on the furnace conditions. Wood is not used in production, but the product quality is more stable. The ratio of the charge is determined according to the grade of the product required to be produced. The proportion of petroleum coke and bituminous coal is determined according to the amount of carbon required for each batch of ore silicon. The ratio of petroleum coke and bituminous coal has a great influence on the working resistance of the charge. After each component of the furnace charge is weighed, the charge is mixed evenly, and after the furnace is pounded, the uniformly mixed charge is added to the furnace. Keep a certain height of the material surface and feed evenly. Chemical silicon production is continuous. The conditions inside the furnace are not eternal either. Chemical silicon production is a process in which electric energy is converted into heat energy in an electric furnace, and then the heat energy is used to directly heat the material to produce a chemical reaction. Therefore, the electrical characteristics in the furnace are very important. The smelting operation is closed-arc to maintain the high temperature furnace, improve the thermal efficiency, and improve the utilization rate of the electric furnace. In the research, a metal silicon furnace with a capacity of 3200KVA and 6300KVA is used. The smelting is carried out by simmering for a certain period of time and regular concentrated feeding. Under normal circumstances, it is difficult for the charge to sink automatically, and it is generally necessary to force the charge to sink. The furnace condition is easy to fluctuate and difficult to control. Therefore, it is necessary to judge correctly and deal with it in time in production. The furnace is fired every 4 hours for scouring and casting, and the slag is broken and sorted into storage.

 

Products Content
Product grades Chemical composition Chemical composition Chemical composition Chemical composition
    Impurities(%) Impurities(%) Impurities(%)
  Si content(%) Fe Al Ca
1101 99.79 0.1 0.1 0.01
2202 99.58 0.2 0.2 0.02
2502 99.48 0.25 0.25 0.02
3303 99.37 0.3 0.3 0.03
411 99.4 0.4 0.1 0.1
421 99.3 0.4 0.2 0.1
441 99.1 0.4 0.4 0.1
551 98.9 0.5 0.5 0.1
553 98.7 0.5 0.5 0.3
FAQ

Q：Do you accept OEM?
A：Yes, we accept OEM. This is our specialty.

Q: Are you a factory or a trading company?
A: We are manufacturer.

Q: Are you a manufacture or trader?
A: We are truly a manufacturer, we not only can provide the high quality products with the best price, but also can offer the best pre-sale service and after-service.

Contact  Us

ZHENAN INTERNATIOANL CO., LTD

 

 

Fax: +86-372-5055180

 

Email: kevin@zaferroalloy.com

 

Website: www.zaferroalloy.cn

 

Address: 1-2510,Huafu Office Building,Anyang,Henan,China.

Hot Tags: smelting process of silicon for chemical industry, China smelting process of silicon for chemical industry manufacturers, suppliers, factory, 10-50mm Silicon Metal Alloy 3303 For Steelmaking, Aluminum Alloy Use Silicon Metal 441 Metal Silicon, Silicon Metal 421, Silicon Metal 553 For Aluminium Ingot Minerals Metallurgy, Silicon Metal 441 Metallic Silicon Slag For Steelmaking, Silicon Metal 553 Grade Lump Ferro Alloys Metal Silicon

You Might Also Like

Shopping Bags