Magnesium Metal With Great Class

Magnesium is the eighth most abundant element in the Earth's crust. Elemental magnesium is a gray-white lightweight metal and occurs naturally only in combination with other elements.

Send Inquiry

Description

video display

Products Description

The very light metal magnesium is lighter than its oxide, MgO. Thus, the oxide readily sinks, so that clean magnesium alloys are relatively easily achieved within a few minutes, provided the melt is carefully neglected and enthusiastic stirrers of sediments can be kept away.

The dense metal based on zinc, copper and iron all have oxides that are lighter and therefore float to the surface of the melt. The higher melting point irons and steels achieve this especially effectively because their oxides are sometime liquid and so float out as especially compact spherical droplets, or partially liquid, so that compact bifilms resemble sticky lumps that cannot unfurl, thus remaining compact and achieving high flotation velocities, clearing the melt rapidly after a pouring or stirring action.

Thus, steel melts in the furnace are probably of good quality, but are disastrously damaged during the pour into the ladle. The melt then recovers to some extent during the transfer of the ladle to the casting station, and during the usual subsequent wait to allow its temperature to fall to the casting temperature.

M25

Product parameters

Mg	Fe	Si	Ni	Cu	Al
99.98	0.002	0.003	0.002	0.0005	0.004
99.96	0.004	0.004	0.0002	0.002	0.006
99.95	0.004	0.005	0.0007	0.003	0.006

The above fill rates can be adjusted upon request.

Size:as your requirement.

company profile

ZHEN AN INTERNATIONAL Co., Ltd our company is an enterprise specializing in metallurgical & refractory material. We have so many kinds of products, magnesium metal, silicon metal, electrolytic manganese with high quality and huge quantity, besides, ferro alloys such as ferro silicon, ferro vanadium, ferro molybdenum, also can be provided by us. Hope we can help you achieve your career dream.

FAQ

1. What are your payment terms?
T/T or L/C.

2. How to confirm the quality?

We support third-party testing agencies.

3. How long can it be delivered?

It mainly depends on your quatity.

4: Are you a manufacture or trader?
We are manufacture.

5: How are the products’ quality?
The products will be strictly inspected before shipment, so the quality could be guaranteed.