Purging Plug High Opening Rate
Purging Plug is a device used in injection molding for cleaning the barrel of a machine between different material runs. It is inserted into the machine and purges out any residual material in the barrel, thus preventing contamination of the newly loaded material.
Description
Description
Reducing waste - Purging plugs can help prevent material waste by flushing out residual plastic from the machinery used in the production process. This can help save money on raw materials.
Quality control - Using purging plugs can help prevent contamination from previous production runs and ensure that the next run starts with clean machinery.
Improved efficiency - By using purging plugs, downtime can be minimized since it helps speed up the cleaning process, reducing the time it takes to switch between different production runs.
Specification
Purging Plug information
|
MgO.% > |
80 |
|
C.% > |
10 |
|
Apparent porosity:% ≤ |
4 |
|
bulk density.g/cm' > |
Z.90 |
|
cold compressive strength MPa > |
40 |
|
high temperature bending strength, MPa > |
6 |
Washing of products during chemical reactions: In chemical reactions, products often remain in the reaction tubes or reactors, and these residues may have an effect on the ensuing experiments, so the experimental equipment needs to be cleaned with a non-toxic, volatile detergent. In this case, a Purging Plug can be used to control the flow and stopping of the detergent, thus enabling a thorough cleaning of the reactants.
Flow control in material handling systems: In industry, many materials need to be conveyed on an assembly line, and different production stages have different flow requirements. In this case, Purging Plug can be installed to control the flow rate and volume of the material, thus ensuring production quality and efficiency.
FAQ
Q: What is your payments terms?
A: We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
Q: What standards do you have?
A: Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc.
The third party testing is all available for us.
Q:Can we visit your Company?
A:Yes, certainly. You are very welcome to China and we will be honored to have a customer and friend.
Q: Do you provide free samples?
A:Yes, we can provide a free sample for testing, If we have sample in stock.
The quantity based on the material type, The buyer should bear all the shipping costs.
Q:What's your delivery time?
A:It usually needs about 20-45 days after receiving the deposit.
Hot Tags: purging plug high opening rate
Send Inquiry
You Might Also Like
